China Wholesale Price China China Manufacturer For Insulation Paper - D279 Epoxy Pre-impregnated DMD for dry type trasnformers – D&F manufacturers and Exporter

Wholesale Price China China Manufacturer For Insulation Paper - D279 Epoxy Pre-impregnated DMD for dry type trasnformers – D&F

short description:

Product Detail

Product Tags

Feedback (2)

With advanced technologies and facilities, strict good quality manage, reasonable rate, superior assistance and close co-operation with shoppers, we have been devoted to supplying the very best price for our consumers for NHN flexible insulation paper, Copper Strips Flexible Bus Bar Connector, Nickel Plated Busbar, We sincerely welcome friends from all over the world to cooperate with us on the basis of long-term mutual benefits.

Wholesale Price China China Manufacturer For Insulation Paper - D279 Epoxy Pre-impregnated DMD for dry type trasnformers – D&F Detail:

D279 is made from DMD and special epoxy heat resistant resin. It has the characteristics of long storage life, low curing temperature and short curing time. After being cured, it has excellent electrical properties, good adhesive and heat resistance.The heat resistance is Class F. It is also called as Prepreg DMD, pre-impregnaed DMD, flexible composite insulation paper for dry transformers.

D279 DMD(1)
D&F D279 pre-impregnated DMD

Product Features

D279 epoxy pre-impregnated DMD has excellent electrical properties, good adhesive and heat resistance.

Applications

D279 epoxy pre-impregnated DMD is used for layer insulation or liner insulation of low-voltage copper/ aluminum foil winding in dry-type transformers as well as slot insulation and liner insulation in Class B and F electric motors and electric appliances. It is also called as Prepreg DMD, Prepreg insulation composite paper for dry type transformers.

D279 epoxy prepreg DMD

Supply Specifications

Nominal width：1000 mm.

Nominal weight: 50±5kg /Roll.

The splices shall not be more than 3 in a roll.

Color: white or red color.

Appearance

Its surface should be flat, free of uneven resin and impurities affecting performances. While being de-coiled, its surface shall not be conglutinated each other. Free of such defects such as creases, bubbles and wrinkles.

Packing And Storage

D279 should be wrapped with plastic film then put in clean & dry carton

The storage life is 6 months at temperature of below 25℃ after leaving factory. If the storage duration is over 6 months, the product can still be used when being tested to be qualified. The product should be put and/or stored upright and keep away from fire, heat and direct sunshine.

Technical Performances

The standard performance values for D279 epoxy pre-impregnated DMD are shown in table 1 and the typical values are shown in table 2.

Table 1: Standard Performance value for D279 epoxy Prpreg DMD

No.	Properties	Unit	Stand values
1	Nominal thickness	mm	0.16	0.18	0.20	0.23	0.25
2	Thickness tolerance	mm	±0.030		±0.035
3	Grammage (for reference)	g/m²	185	195	210	240	270
4	Tensile strength (MD)	N/10mm	≥70		≥80		≥100
5	Dissolvable resin content	g/m²	60±15
6	Volatile content	%	≤1.5
7	Dielectric strength	MV/m	≥40
8	Shear strength under tension	MPa	≥3.0

Table 2: Typical performance values for D279 epoxy Prepreg DMD

No.	Properties	Unit	Typical values
1	Nominal thickness	mm	0.16	0.18	0.20	0.23	0.25
	Thickness tolerance	mm	0.010		0.015
2	Grammage (for reference)	g/m²	186	198	213	245	275
3	Tensile strength (MD)	N/10mm	100	105	115	130	180
4	Dissolvable resin content	g/m²	65
5	Volatile content	%	1.0
6	Dielectric strength	MV/m	55
7	Shear strength under tension	MPa	8

Application and Remarks

Recommended curing conditions

Table 2

Temperature（℃）	130	140	150
Curing time（h）	5	4	3

Production Equipment

We have two lines, the production capacity is 200T/month.

Product detail pictures:

Related Product Guide:

Fast and good quotations, informed advisers to help you choose the correct product that suits all your needs, a short production time, responsible quality control and different services for paying and shipping affairs for Wholesale Price China China Manufacturer For Insulation Paper - D279 Epoxy Pre-impregnated DMD for dry type trasnformers – D&F , The product will supply to all over the world, such as: Marseille, Australia, Pretoria, Now, we professionally supplies customers with our main products And our business is not only the "buy" and "sell", but also focus on more. We target to be your loyal supplier and long-term cooperator in China. Now, We hope to be the friends with you.

Class H Insulation Paper Nhn