Supply ODM China Fr4 3240 Epoxy Glass Fiber Laminate Sheet
Always customer-oriented, and it’s our ultimate goal to get not only by far the most reputable, trustable and honest supplier, but also the partner for our customers for Supply ODM China Fr4 3240 Epoxy Glass Fiber Laminate Sheet, How about to start your good organization with our corporation? We are all set, properly trained and fulfilled with pride. Let’s start our new business enterprise with new wave.
Always customer-oriented, and it’s our ultimate goal to get not only by far the most reputable, trustable and honest supplier, but also the partner for our customers for China 3240 High Temperature Epoxy Board, Laminated Resin 3240 Epoxy Sheet, Due to our strict pursues in quality, and after-sale service, our product gets more and more popular around the world. Many clients came to visit our factory and place orders. And there are also many foreign friends who came for sight seeing, or entrust us to buy other stuff for them. You are most welcome to come to China, to our city and to our factory!
Technical Requirements
1.1 Appearance: the surface of sheet shall be flat and smooth, free of air bubbles, wrinkles or cracks and reasonably free of other small imperfections such as scratches, dents, etc. The edge of sheet shall be tidy and be free of delaminations and cracks. The color shall be substantially uniform, but a few stains are permissible.
1.2 Dimension and allowed tolerance
1.2.1 Width and Length of Sheets
Width & Length (mm) |
Tolerance (mm) |
>970~3000 |
+/-25 |
1.2.2 The nominal thickness & tolerance
Nominal thickness (mm) |
Tolerance (mm) |
Nominal thickness (mm) |
Tolerance (mm) |
0.5 0.6 0.8 1.0 1.2 1.6 2.0 2.5 3.0 4.0 5.0 6.0 8.0 |
+/-0.12 +/-0.13 +/-0.16 +/-0.18 +/-0.20 +/-0.24 +/-0.28 +/-0.33 +/-0.37 +/-0.45 +/-0.52 +/-0.60 +/-0.72 |
10 12 14 16 20 25 30 35 40 45 50 60 80 |
+/-0.82 +/-0.94 +/-1.02 +/-1.12 +/-1.30 +/-1.50 +/-1.70 +/-1.95 +/-2.10 +/-2.30 +/-2.45 +/-2.50 +/-2.80 |
Remarks: For the non-nominal thickness not listed in this table, the deviation shall be the same as that of the next greater thickness. |
1.3 Bending Deflection
Thickness (mm) |
Bending Deflection |
|
1000mm(Ruler length) (mm) |
500mm(Ruler length)(mm) |
|
3.0~6.0 >6.0~8.0 >8.0 |
≤10 ≤8 ≤6 |
≤2.5 ≤2.0 ≤1.5 |
1.4 Mechanical processing: the sheets shall be free of cracks, delaminations and scraps when such machining as sawing, drilling, lathing and milling is applied
1.5 The physical, mechanical and electrcal properties
No. |
Properties |
Unit |
Standard value |
Typical value |
1 |
Density |
g/cm3 |
1.7~1.95 |
1.94 |
2 |
Water absoprtion (2mm sheet) |
mg |
≤20 |
5.7 |
3 |
Flexural strength, perpendicular to laminations |
MPa |
≥340 |
417 |
4 |
Impact strength (Charpy, notch) |
kJ/m2 |
≥30 |
50 |
5 |
Dielectric dissipation factor 50Hz |
— |
≤5.5 |
4.48 |
6 |
Dielectric constant 50Hz |
— |
≤0.04 |
0.02 |
7 |
Insulation resistance ( After 24h in water) |
Ω |
≥5.0 x108 |
4.9 x109 |
8 |
Dielectric strength, perpendicular to laminationsin transformer oil at 90℃+/-2℃, 1mm sheet |
kV/mm |
≥14.2 |
16.8 |
9 |
Breakdown Voltage, parallel to laminationsin transformer oil at 90℃+/-2℃ |
kV |
≥35 |
38 |
Packing, Transportation and Storage
The sheets shall be stored in a place where temperature is no higher than 40℃, and be placed horizontally on a bedplate with a height of 50mm or above. Keep away from fire, heat (heating apparatus) and direct sunshine. The storage life of sheets is 18 months from the date of leaving factory. If the storage duration is over 18 months, the product also could be used after being tested to be qualified.
Remarks and Precautions for Application
A high speed and small cutting depth g shall be applied when machining because of sheets’ weak thermal conductivity.
Machining and cutting this product will release much dust and smoke. Suitable measures should be taken to ensure dust levels are within acceptable limits during operations. Local exhaust ventilation and using the dust/particle masks are advised.
The sheets are subject to moisture after being machined, a coating of insulating vanish is recommended.
Production Equipment
The Package For Laminated Sheets
Always customer-oriented, and it’s our ultimate goal to get not only by far the most reputable, trustable and honest supplier, but also the partner for our customers for Supply ODM China Fr4 3240 Epoxy Glass Fiber Laminate Sheet, How about to start your good organization with our corporation? We are all set, properly trained and fulfilled with pride. Let’s start our new business enterprise with new wave.
Supply ODM China 3240 High Temperature Epoxy Board, Laminated Resin 3240 Epoxy Sheet, Due to our strict pursues in quality, and after-sale service, our product gets more and more popular around the world. Many clients came to visit our factory and place orders. And there are also many foreign friends who came for sight seeing, or entrust us to buy other stuff for them. You are most welcome to come to China, to our city and to our factory!