China OEM Manufacturer Epoxy Glass Cloth Laminated Sheets H Class G11 - 3240 Epoxy Phenolic Glass Cloth Base Rigid Laminated Sheet – D&F manufacturers and Exporter

OEM Manufacturer Epoxy Glass Cloth Laminated Sheets H Class G11 - 3240 Epoxy Phenolic Glass Cloth Base Rigid Laminated Sheet – D&F

short description:

Product Detail

Product Tags

Feedback (2)

We know that we only thrive if we can guarantee our combined rate competiveness and good quality advantageous at the same time for Copper Bus Bar With Heat Shink Tube, B-class DMD, DMD100 flexible laminate, If you are interested in any products, please feel free to contact us for further information or please send us email directly, we will reply you within 24 hours and the best quotation will be provided.

OEM Manufacturer Epoxy Glass Cloth Laminated Sheets H Class G11 - 3240 Epoxy Phenolic Glass Cloth Base Rigid Laminated Sheet – D&F Detail:

Technical Requirements

1.1 Appearance: the surface of sheet shall be flat and smooth, free of air bubbles, wrinkles or cracks and reasonably free of other small imperfections such as scratches, dents, etc. The edge of sheet shall be tidy and be free of delaminations and cracks. The color shall be substantially uniform, but a few stains are permissible.

1.2 Dimension and allowed tolerance

1.2.1 Width and Length of Sheets

Width & Length (mm)	Tolerance (mm)
＞970～3000	+/-25

1.2.2 The nominal thickness & tolerance

Nominal thickness (mm)

Tolerance (mm)

Nominal thickness (mm)

Tolerance (mm)

0.5

0.6

0.8

1.0

1.2

1.6

2.0

2.5

3.0

4.0

5.0

6.0

8.0

+/-0.12

+/-0.13

+/-0.16

+/-0.18

+/-0.20

+/-0.24

+/-0.28

+/-0.33

+/-0.37

+/-0.45

+/-0.52

+/-0.60

+/-0.72

+/-0.82

+/-0.94

+/-1.02

+/-1.12

+/-1.30

+/-1.50

+/-1.70

+/-1.95

+/-2.10

+/-2.30

+/-2.45

+/-2.50

+/-2.80

Remarks: For the non-nominal thickness not listed in this table, the deviation shall be the same as that of the next greater thickness.

1.3 Bending Deflection

Thickness (mm)

Bending Deflection

1000mm（Ruler length） (mm)

500mm（Ruler length）(mm)

3.0～6.0

＞6.0～8.0

＞8.0

≤10

≤8

≤6

≤2.5

≤2.0

≤1.5

1.4 Mechanical processing: the sheets shall be free of cracks, delaminations and scraps when such machining as sawing, drilling, lathing and milling is applied

1.5 The physical, mechanical and electrcal properties

No.	Properties	Unit	Standard value	Typical value
1	Density	g/cm³	1.7～1.95	1.94
2	Water absoprtion (2mm sheet)	mg	≤20	5.7
3	Flexural strength, perpendicular to laminations	MPa	≥340	417
4	Impact strength (Charpy, notch)	kJ/m²	≥30	50
5	Dielectric dissipation factor 50Hz	—	≤5.5	4.48
6	Dielectric constant 50Hz	—	≤0.04	0.02
7	Insulation resistance ( After 24h in water)	Ω	≥5.0 x10⁸	4.9 x10⁹
8	Dielectric strength, perpendicular to laminationsin transformer oil at 90℃+/-2℃, 1mm sheet	kV/mm	≥14.2	16.8
9	Breakdown Voltage, parallel to laminationsin transformer oil at 90℃+/-2℃	kV	≥35	38

Packing, Transportation and Storage

The sheets shall be stored in a place where temperature is no higher than 40℃, and be placed horizontally on a bedplate with a height of 50mm or above. Keep away from fire, heat (heating apparatus) and direct sunshine. The storage life of sheets is 18 months from the date of leaving factory. If the storage duration is over 18 months, the product also could be used after being tested to be qualified.

3240 (3)
3240 (4)

Remarks and Precautions for Application

A high speed and small cutting depth g shall be applied when machining because of sheets’ weak thermal conductivity.

Machining and cutting this product will release much dust and smoke. Suitable measures should be taken to ensure dust levels are within acceptable limits during operations. Local exhaust ventilation and using the dust/particle masks are advised.

The sheets are subject to moisture after being machined, a coating of insulating vanish is recommended.

3240 machining parts(10)
CNC machining insulation parts(1)

Production Equipment

3240 (7)
3240 (8)
3240 (9)
3240 (10)

The Package For Laminated Sheets

3240 (12)
3240 (11)

Product detail pictures:

Related Product Guide:

The key to our success is "Good Product Excellent, Reasonable Rate and Efficient Service" for OEM Manufacturer Epoxy Glass Cloth Laminated Sheets H Class G11 - 3240 Epoxy Phenolic Glass Cloth Base Rigid Laminated Sheet – D&F , The product will supply to all over the world, such as: Malaysia, Malta, United Arab Emirates, When It produced, it making use of the world's major method for reliable operation, a low failure price, it appropriate for Jeddah shoppers choice. Our enterprise. s situated inside the national civilized cities, the website traffic is very hassle-free, unique geographical and financial circumstances. We pursue a "people-oriented, meticulous manufacturing, brainstorm, make brilliant" company philosophy. Strict good quality management, fantastic service, affordable cost in Jeddah is our stand around the premise of competitors. If needed, welcome to make contact with us by our web page or phone consultation, we'll be delighted to serve you.

Aluminium Laminated Flexible Connectors