China Hot-selling Transformer Dmd Insulation Paper - D279 Epoxy Pre-impregnated DMD for dry type trasnformers – D&F manufacturers and Exporter

Hot-selling Transformer Dmd Insulation Paper - D279 Epoxy Pre-impregnated DMD for dry type trasnformers – D&F

short description:

Product Detail

Product Tags

Feedback (2)

We strive for excellence, services the customers", hopes to be the top cooperation team and dominator business for personnel, suppliers and prospects, realizes benefit share and continual promotion for SMC insulating profiles, polyimide glass cloth sheet, processed insulating part, With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in this industries and other industries.

Hot-selling Transformer Dmd Insulation Paper - D279 Epoxy Pre-impregnated DMD for dry type trasnformers – D&F Detail:

D279 is made from DMD and special epoxy heat resistant resin. It has the characteristics of long storage life, low curing temperature and short curing time. After being cured, it has excellent electrical properties, good adhesive and heat resistance.The heat resistance is Class F. It is also called as Prepreg DMD, pre-impregnaed DMD, flexible composite insulation paper for dry transformers.

D279 DMD(1)
D&F D279 pre-impregnated DMD

Product Features

D279 epoxy pre-impregnated DMD has excellent electrical properties, good adhesive and heat resistance.

Applications

D279 epoxy pre-impregnated DMD is used for layer insulation or liner insulation of low-voltage copper/ aluminum foil winding in dry-type transformers as well as slot insulation and liner insulation in Class B and F electric motors and electric appliances. It is also called as Prepreg DMD, Prepreg insulation composite paper for dry type transformers.

D279 epoxy prepreg DMD

Supply Specifications

Nominal width：1000 mm.

Nominal weight: 50±5kg /Roll.

The splices shall not be more than 3 in a roll.

Color: white or red color.

Appearance

Its surface should be flat, free of uneven resin and impurities affecting performances. While being de-coiled, its surface shall not be conglutinated each other. Free of such defects such as creases, bubbles and wrinkles.

Packing And Storage

D279 should be wrapped with plastic film then put in clean & dry carton

The storage life is 6 months at temperature of below 25℃ after leaving factory. If the storage duration is over 6 months, the product can still be used when being tested to be qualified. The product should be put and/or stored upright and keep away from fire, heat and direct sunshine.

Technical Performances

The standard performance values for D279 epoxy pre-impregnated DMD are shown in table 1 and the typical values are shown in table 2.

Table 1: Standard Performance value for D279 epoxy Prpreg DMD

No.	Properties	Unit	Stand values
1	Nominal thickness	mm	0.16	0.18	0.20	0.23	0.25
2	Thickness tolerance	mm	±0.030		±0.035
3	Grammage (for reference)	g/m²	185	195	210	240	270
4	Tensile strength (MD)	N/10mm	≥70		≥80		≥100
5	Dissolvable resin content	g/m²	60±15
6	Volatile content	%	≤1.5
7	Dielectric strength	MV/m	≥40
8	Shear strength under tension	MPa	≥3.0

Table 2: Typical performance values for D279 epoxy Prepreg DMD

No.	Properties	Unit	Typical values
1	Nominal thickness	mm	0.16	0.18	0.20	0.23	0.25
	Thickness tolerance	mm	0.010		0.015
2	Grammage (for reference)	g/m²	186	198	213	245	275
3	Tensile strength (MD)	N/10mm	100	105	115	130	180
4	Dissolvable resin content	g/m²	65
5	Volatile content	%	1.0
6	Dielectric strength	MV/m	55
7	Shear strength under tension	MPa	8

Application and Remarks

Recommended curing conditions

Table 2

Temperature（℃）	130	140	150
Curing time（h）	5	4	3

Production Equipment

We have two lines, the production capacity is 200T/month.

Product detail pictures:

Related Product Guide:

Innovation, excellent and reliability are the core values of our business. These principles today extra than ever form the basis of our success as an internationally active mid-size company for Hot-selling Transformer Dmd Insulation Paper - D279 Epoxy Pre-impregnated DMD for dry type trasnformers – D&F , The product will supply to all over the world, such as: Japan, Bangkok, South Africa, Our company has built stable business relationships with many well-known domestic companies as well as oversea customers. With the goal of providing high quality products to customers at low cots, we are committed to improving its capacities in research, development, manufacturing and management. We have honored to receive recognition from our customers. Till now we have passed ISO9001 in 2005 and ISO/TS16949 in 2008. Enterprises of "quality of survival, the credibility of development" for the purpose, sincerely welcome domestic and foreign businessmen to visit to discuss cooperation.

6650 Nhn Insulation Paper