High Quality China 3240 G10 Fr4 Material Epoxy Glass Fiber Sheet with High Strength
Our firm has been concentrating on brand strategy. Customers’ satisfaction is our best advertising. We also offer OEM provider for High Quality China 3240 G10 Fr4 Material Epoxy Glass Fiber Sheet with High Strength, We cordially welcome consumers from at your home and abroad to affix us and cooperate with us to take pleasure in a greater long term.
Our firm has been concentrating on brand strategy. Customers’ satisfaction is our best advertising. We also offer OEM provider for 3240 Epoxy Electrical Insulation Laminate Sheet, China 3240 Epoxy Glass Fiber Sheet, Our company sets up several departments, including production department, sales department, quality control department and sevice center,etc. only for accomplish the good-quality product to meet customer’s demand, all of our solutions have been strictly inspected before shipment. We always think about the question on the side of the customers,because you win,we win!
Technical Requirements
1.1 Appearance: the surface of sheet shall be flat and smooth, free of air bubbles, wrinkles or cracks and reasonably free of other small imperfections such as scratches, dents, etc. The edge of sheet shall be tidy and be free of delaminations and cracks. The color shall be substantially uniform, but a few stains are permissible.
1.2 Dimension and allowed tolerance
1.2.1 Width and Length of Sheets
Width & Length (mm) |
Tolerance (mm) |
>970~3000 |
+/-25 |
1.2.2 The nominal thickness & tolerance
Nominal thickness (mm) |
Tolerance (mm) |
Nominal thickness (mm) |
Tolerance (mm) |
0.5 0.6 0.8 1.0 1.2 1.6 2.0 2.5 3.0 4.0 5.0 6.0 8.0 |
+/-0.12 +/-0.13 +/-0.16 +/-0.18 +/-0.20 +/-0.24 +/-0.28 +/-0.33 +/-0.37 +/-0.45 +/-0.52 +/-0.60 +/-0.72 |
10 12 14 16 20 25 30 35 40 45 50 60 80 |
+/-0.82 +/-0.94 +/-1.02 +/-1.12 +/-1.30 +/-1.50 +/-1.70 +/-1.95 +/-2.10 +/-2.30 +/-2.45 +/-2.50 +/-2.80 |
Remarks: For the non-nominal thickness not listed in this table, the deviation shall be the same as that of the next greater thickness. |
1.3 Bending Deflection
Thickness (mm) |
Bending Deflection |
|
1000mm(Ruler length) (mm) |
500mm(Ruler length)(mm) |
|
3.0~6.0 >6.0~8.0 >8.0 |
≤10 ≤8 ≤6 |
≤2.5 ≤2.0 ≤1.5 |
1.4 Mechanical processing: the sheets shall be free of cracks, delaminations and scraps when such machining as sawing, drilling, lathing and milling is applied
1.5 The physical, mechanical and electrcal properties
No. |
Properties |
Unit |
Standard value |
Typical value |
1 |
Density |
g/cm3 |
1.7~1.95 |
1.94 |
2 |
Water absoprtion (2mm sheet) |
mg |
≤20 |
5.7 |
3 |
Flexural strength, perpendicular to laminations |
MPa |
≥340 |
417 |
4 |
Impact strength (Charpy, notch) |
kJ/m2 |
≥30 |
50 |
5 |
Dielectric dissipation factor 50Hz |
— |
≤5.5 |
4.48 |
6 |
Dielectric constant 50Hz |
— |
≤0.04 |
0.02 |
7 |
Insulation resistance ( After 24h in water) |
Ω |
≥5.0 x108 |
4.9 x109 |
8 |
Dielectric strength, perpendicular to laminationsin transformer oil at 90℃+/-2℃, 1mm sheet |
kV/mm |
≥14.2 |
16.8 |
9 |
Breakdown Voltage, parallel to laminationsin transformer oil at 90℃+/-2℃ |
kV |
≥35 |
38 |
Packing, Transportation and Storage
The sheets shall be stored in a place where temperature is no higher than 40℃, and be placed horizontally on a bedplate with a height of 50mm or above. Keep away from fire, heat (heating apparatus) and direct sunshine. The storage life of sheets is 18 months from the date of leaving factory. If the storage duration is over 18 months, the product also could be used after being tested to be qualified.
Remarks and Precautions for Application
A high speed and small cutting depth g shall be applied when machining because of sheets’ weak thermal conductivity.
Machining and cutting this product will release much dust and smoke. Suitable measures should be taken to ensure dust levels are within acceptable limits during operations. Local exhaust ventilation and using the dust/particle masks are advised.
The sheets are subject to moisture after being machined, a coating of insulating vanish is recommended.
Production Equipment
The Package For Laminated Sheets
Our firm has been concentrating on brand strategy. Customers’ satisfaction is our best advertising. We also offer OEM provider for High Quality China 3240 G10 Fr4 Material Epoxy Glass Fiber Sheet with High Strength, We cordially welcome consumers from at your home and abroad to affix us and cooperate with us to take pleasure in a greater long term.
High Quality China 3240 Epoxy Glass Fiber Sheet, 3240 Epoxy Electrical Insulation Laminate Sheet, Our company sets up several departments, including production department, sales department, quality control department and sevice center,etc. only for accomplish the good-quality product to meet customer’s demand, all of our solutions have been strictly inspected before shipment. We always think about the question on the side of the customers,because you win,we win!