Chinese Professional Epgm Sheet - GPO-3 (UPGM203) Unsaturated Polyester Glass Mat Laminated Sheet – D&F
Chinese Professional Epgm Sheet - GPO-3 (UPGM203) Unsaturated Polyester Glass Mat Laminated Sheet – D&F Detail:
GPO-3 Molded Sheet (also called GPO3,UPGM203) consists of alkali–free glass mat impregnated and bonded with the unsaturated polyester resin, and laminated under high temperature and high pressure in mould. It has good machinability, high mechanical strength, good dielectric properties, excellent proof tracking resistance and arc resistance. It is with UL certification and passed the test of REACH and RoHS, etc. It is also called as GPO-3 or GPO3 sheet,GPO-3 or GPO3 insulation board.
It is applicable for making insulation structural and supportive components or parts in F-class electric motors, transformers, switch gears, circuit breakers and electrical equipment. The UPGM can be directly molded into different profiles or insulation structural parts.
Thickness range：2mm—60mm
Sheet size：1020mm *2010mm, 1000mm*2000mm, 1220mm*2440mm and other negotiated thickness or/and sizes
Main color: red, white or other negotiated colors
Besides the UPGM laminated sheets, we also produce and supply the EPGM 203 sheets, the sheet dimension are the same as those of GPO-3. The color is yellowish or green. Please contact me for more information.
Technical Requirements
Appearance
Its surface shall be flat and smooth, free from blisters, wrinkles or cracks and reasonably free from other small imperfections such as scratches, dents and uneven colors.
Normal thickness and tolerance
|
Nominal Thickness (mm) |
Allowed tolerance (mm) |
Nominal Thickness (mm) |
Allowed tolerance (mm) |
|
|
0.8 |
+/-0.23 |
12 |
+/-0.90 |
|
|
1.0 |
+/-0.23 |
14 |
+/-1.00 |
|
|
2.0 |
+/-0.30 |
16 |
+/-1.10 |
|
|
3.0 |
+/-0.35 |
20 |
+/-1.30 |
|
|
4.0 |
+/-0.40 |
25 |
+/-1.40 |
|
|
5.0 |
+/-0.55 |
30 |
+/-1.45 |
|
|
6.0 |
+/-0.60 |
40 |
+/-1.55 |
|
|
8.0 |
+/-0.70 |
50 |
+/-1.75 |
|
|
10.0 |
+/-0.80 |
60 |
+/-1.90 |
|
| Note: For sheets of non-nominal thickness not listed in this table, the allowed deviation shall be the same as that of the next greater thickness. | ||||
Physical, mechanical and electrical properties
| Properties | Unit | Standard value | Typical value | Test method | ||
| Density | g/cm3 | 1.65~1.95 | 1.8 | GB/T 1033.1-2008 | ||
| (method A) | ||||||
| Water absorption, 3mm thickness | % | ≤ 0.2 | 0.16 | ASTM D790-03 | ||
| Flexural strength,perpendicular to laminations (Lengthwise) | At normal condition | MPa | ≥180 | 235 | ASTM D790-03 | |
| 130℃+/-2℃ | ≥100 | 144 | ||||
| Flexural modulus, perpendicular to laminations (Lengthwise) | At normal condition | MPa | - | 1.43 x 104 | ||
| 130℃+/-2℃ | - | 1.10 x 104 | ||||
| Flexural strength,perpendicular to laminations (Lengthwise) | Lengthwise | MPa | ≥170 | 243 | GB/T 1449-2005 | |
| Crosswise | ≥150 | 240 | ||||
| Impact Strength, parallel to laminations | KJ/m2 | ≥40 | 83.1 | GB/T 1043.1-2008 | ||
| (Charpy, unnotched) | ||||||
| Impact Strength, parallel to laminations | J/m | - | 921 | ASTM D256-06 | ||
| (Izod, notched) | ||||||
| Tensile strength | MPa | ≥150 | 165 | GB/T 1040.2-2006 | ||
| Tensile elasticity modulus | MPa | ≥1.5×104 | 1.7 x 104 | |||
| Tensile strength,parallel to laminations | Lengthwise | MPa | ≥55 | 165 | GB/T1447-2005 | |
| Crosswise | ≥55 | 168 | ||||
| Perpendicular to laminations | MPa | - | 230 | ASTM D695-10 | ||
| Compression strength | ||||||
| Dielectric strength,perpendicular to laminations (in 25# transformer oil at 90℃+/-2℃,short-time test, Φ25mm/Φ75mm cylindrical electrode ) | KV/mm | ≥12 | 135 | IEC60243-1:2013 | ||
| Breakdown voltage,parallel to lanimations (in 25# transformer oil at 90℃+/-2℃,short-time test, Φ130mm/Φ130mm plate electrode ) | KV | ≥35 | ＞100 | |||
| Relative permittivity （1MHz） | - | ≤ 4.8 | 4.54 | GB/T 1409-2006 | ||
| Dielectric dissipation factor （1MHz） | - | ≤ 0.03 | 1.49 x 10-2 | |||
| Arc Resistance | s | ≥180 | 187 | GB/T 1411-2002 | ||
| Tracking resistance | CTI | V | ≥600 | CTI 600 | ||
| Overpass | GB/T 4207-2012 | |||||
| PTI | ≥600 | PTI 600 | ||||
| Insulation resistance | At normal condition | Ω | ≥1.0×1013 | 5.4 x 1014 | GB/T 10064-2006 | |
| (Taper pin electrodes) | After 24h in water | ≥1.0×1012 | 2.5 x 1014 | |||
| Flammability (Vertical method) | Grade | V-0 | V-0 | UL94-2013 | ||
| Glow wire | - | - | GWIT:960/3.0 | GB/T5169.13-2006 | ||
| Barcol hardness | - | ≥ 55 | 60 | ASTM D2583-07 | ||
Inspection, Mark, Packaging and Storage
1) Each batch should be tested before dispatch. The inspection items for Routine Test shall include Clause 2.1, 2.2, and Item 1 and Item 3 of Table 6 in Clause 2.3. The items in Clause 2.1, 2.2, should be checked one by one.
2) The sheets shall be stored in a place where temperature is no higher than 40℃, and be placed horizontally on a bed plate with a height of 50mm or above. Keep away from fire, heat (heating apparatus) and direct sunshine. The storage life of sheets is 18 months from the date of leaving factory. If the storage duration is over 18 months, the product also could be used after being tested to be qualified.
Remarks and Precautions for Handling and Use
1)A high speed and small depth of cutting shall be applied when machining because of sheets’ weak thermal conductivity.
2) Machining and cutting this product will release much dust and smoke. Suitable measures should be taken to ensure dust levels are within acceptable limits during operations. Local exhaust ventilation and use of suitable dust/particle masks is advised.
Certification
Product detail pictures:
Related Product Guide:
We've got a highly efficient group to deal with inquiries from shoppers. Our purpose is "100% client fulfillment by our product high-quality, price tag & our staff service" and enjoy a superb reputation amongst clientele. With quite a few factories, we will provide a wide variety of Chinese Professional Epgm Sheet - GPO-3 (UPGM203) Unsaturated Polyester Glass Mat Laminated Sheet – D&F , The product will supply to all over the world, such as: Australia, Romania, Latvia, Our professional engineering group will always be ready to serve you for consultation and feedback. We're able to also offer you with absolutely free samples to meet your requirements. Finest efforts will likely be produced to offer you the ideal service and goods. For anyone who is thinking about our company and merchandise, be sure to contact us by sending us emails or contact us quickly. As a way to know our merchandise and firm. lot more, you can come to our factory to find out it. We'll always welcome guests from all over the world to our business to build company relations with us. Be sure to feel free to get in touch with us for business and we believe we've been intending to share the top trading practical experience with all our merchants.
By Margaret from Zimbabwe - 2018.03.03 13:09
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Ina from Berlin - 2017.10.23 10:29
